project:1.6 driver,aka the beast
+4
Wiztic
slimg60
lemski
i_am_me
8 posters
Page 3 of 6
Page 3 of 6 • 1, 2, 3, 4, 5, 6
Re: project:1.6 driver,aka the beast
the speedo from the two pin clocks can be put into the single pin clocks but not the other way around because of some of the wiring in the speedo unit.
i_am_me- Can't Shut Me Up
- Posts : 645
Join date : 2011-01-17
Age : 34
Location : riby
Re: project:1.6 driver,aka the beast
ahhh that makrs some sort of sens
lemski- Top Of The World (Legend)
- Posts : 1462
Join date : 2011-01-17
Age : 33
Location : north cotes
Re: project:1.6 driver,aka the beast
since i had a puncture in one of my wheels and my space saver finally giving up the ghost.i decide it was time to fit a matching set of wheels
there off a passat gt,were silver but it was boring so i decided to spray them orange
not as nice as my old wheels but they will do till i get some new tires.
also,the best part of skegvegas,the free detectives slam shop air freshener
there off a passat gt,were silver but it was boring so i decided to spray them orange
not as nice as my old wheels but they will do till i get some new tires.
also,the best part of skegvegas,the free detectives slam shop air freshener
Last edited by i_am_me on Thu Jun 30, 2011 12:24 pm; edited 1 time in total
i_am_me- Can't Shut Me Up
- Posts : 645
Join date : 2011-01-17
Age : 34
Location : riby
Re: project:1.6 driver,aka the beast
gave it a polish with autoglym srp and then waxed it
i_am_me- Can't Shut Me Up
- Posts : 645
Join date : 2011-01-17
Age : 34
Location : riby
Re: project:1.6 driver,aka the beast
bit of rust removal today.
got out the flap wheel on the drill and ground as much rust away as i could the filled sanded and painted
its not prefect but will do until i can get some proper paint and redo it properly.
got out the flap wheel on the drill and ground as much rust away as i could the filled sanded and painted
its not prefect but will do until i can get some proper paint and redo it properly.
i_am_me- Can't Shut Me Up
- Posts : 645
Join date : 2011-01-17
Age : 34
Location : riby
Re: project:1.6 driver,aka the beast
car libve in the garage now?
lemski- Top Of The World (Legend)
- Posts : 1462
Join date : 2011-01-17
Age : 33
Location : north cotes
Re: project:1.6 driver,aka the beast
it does now.
we cleaned up so i have the space in there now
we cleaned up so i have the space in there now
i_am_me- Can't Shut Me Up
- Posts : 645
Join date : 2011-01-17
Age : 34
Location : riby
Re: project:1.6 driver,aka the beast
spot on mate.
lemski- Top Of The World (Legend)
- Posts : 1462
Join date : 2011-01-17
Age : 33
Location : north cotes
Re: project:1.6 driver,aka the beast
its outside tonight cos ive only just got back and cant be bothered to put it in the garage
i_am_me- Can't Shut Me Up
- Posts : 645
Join date : 2011-01-17
Age : 34
Location : riby
Re: project:1.6 driver,aka the beast
lazy mate, out of all my mk2 parts, what is it exactly u want for yours? i'll put em to one side for you. mr h is on the road in a week.
lemski- Top Of The World (Legend)
- Posts : 1462
Join date : 2011-01-17
Age : 33
Location : north cotes
Re: project:1.6 driver,aka the beast
obviously i want my tools back
i need the front discs and pads,and maybe the calipers.
ian needs the rear discs and such.
depending on if you need a rolling shell to scrap,i will have the front subframe,wishbones,hubs and steering and my rear axle if you dont need them.
any other parts i can keep as spares basically,cos its useful to have the spares when i need them.
at least he will be on the road again soon
i need the front discs and pads,and maybe the calipers.
ian needs the rear discs and such.
depending on if you need a rolling shell to scrap,i will have the front subframe,wishbones,hubs and steering and my rear axle if you dont need them.
any other parts i can keep as spares basically,cos its useful to have the spares when i need them.
at least he will be on the road again soon
i_am_me- Can't Shut Me Up
- Posts : 645
Join date : 2011-01-17
Age : 34
Location : riby
Re: project:1.6 driver,aka the beast
haha chers for adding in the disks n that fa me
roccy- Top Of The World (Legend)
- Posts : 1014
Join date : 2011-01-17
Age : 33
Location : grimsby
Re: project:1.6 driver,aka the beast
you have to remind him or he will forget and donate them to the scrapyard
i_am_me- Can't Shut Me Up
- Posts : 645
Join date : 2011-01-17
Age : 34
Location : riby
Re: project:1.6 driver,aka the beast
quick update
i have fitted a neuspeed strut brace,it only arrived today but i couldn't wait,just need some thicker bolts but its ok for now(ignore the messy wiring its slowly getting better)
also got my 13`s back on after i finally found a tyre that would fit.
i have fitted a neuspeed strut brace,it only arrived today but i couldn't wait,just need some thicker bolts but its ok for now(ignore the messy wiring its slowly getting better)
also got my 13`s back on after i finally found a tyre that would fit.
i_am_me- Can't Shut Me Up
- Posts : 645
Join date : 2011-01-17
Age : 34
Location : riby
Re: project:1.6 driver,aka the beast
which lights do you think suit my car best?
ive just made the bottom two sets and i don't know which to go with
ive just made the bottom two sets and i don't know which to go with
i_am_me- Can't Shut Me Up
- Posts : 645
Join date : 2011-01-17
Age : 34
Location : riby
Re: project:1.6 driver,aka the beast
cant decide between middle or tops but not the bottom ones
roccy- Top Of The World (Legend)
- Posts : 1014
Join date : 2011-01-17
Age : 33
Location : grimsby
Re: project:1.6 driver,aka the beast
ive got the bottom ones on atm
mostly because it was the last set i fitted to see what they looked like then couldn't be bothered to change them again.
mostly because it was the last set i fitted to see what they looked like then couldn't be bothered to change them again.
i_am_me- Can't Shut Me Up
- Posts : 645
Join date : 2011-01-17
Age : 34
Location : riby
Re: project:1.6 driver,aka the beast
one of them things tho i may change my mind when i see them in real life i may pop round tommorow but i shal ring u first i'm helping lem out in the morning for his mot so we shall see
roccy- Top Of The World (Legend)
- Posts : 1014
Join date : 2011-01-17
Age : 33
Location : grimsby
Re: project:1.6 driver,aka the beast
in that case you can bring my brakes with you
i_am_me- Can't Shut Me Up
- Posts : 645
Join date : 2011-01-17
Age : 34
Location : riby
Re: project:1.6 driver,aka the beast
Top ones look really good, and its not a common thing to do either id go for those personally.
Sakers- Starting To Speak
- Posts : 89
Join date : 2011-01-31
Age : 31
Location : Cleethorpes
Re: project:1.6 driver,aka the beast
bottom set
lemski- Top Of The World (Legend)
- Posts : 1462
Join date : 2011-01-17
Age : 33
Location : north cotes
Re: project:1.6 driver,aka the beast
are you saying that seriously or just to disagree with ian?
i_am_me- Can't Shut Me Up
- Posts : 645
Join date : 2011-01-17
Age : 34
Location : riby
lemski- Top Of The World (Legend)
- Posts : 1462
Join date : 2011-01-17
Age : 33
Location : north cotes
Re: project:1.6 driver,aka the beast
fitted the drilled and grooved discs and red stuff pads kindly donated by Liam
also fitted an uprated headlight loom but haven't got any pictures
also fitted an uprated headlight loom but haven't got any pictures
i_am_me- Can't Shut Me Up
- Posts : 645
Join date : 2011-01-17
Age : 34
Location : riby
Re: project:1.6 driver,aka the beast
Looking good. Happy braking
lemski- Top Of The World (Legend)
- Posts : 1462
Join date : 2011-01-17
Age : 33
Location : north cotes
Page 3 of 6 • 1, 2, 3, 4, 5, 6
Page 3 of 6
Permissions in this forum:
You cannot reply to topics in this forum
|
|